* Wifi control device: iPhone /iPad / iTouch App control, search “Steamtec Sauna”

*Auto descaling pump: Choose descaling time under “4~8H”, once the steam generator is off, the solution will be pumped automatically into a water tank for soaking. When the setting time reaches, steam generator will start to drain, flushing, and then power off.It’s perfect for commercial use as you only need to make descaling setting one time, and the machine will repeat descaling every day.

*Commercial mode-fast steam: If you switch to commercial mode, water will be kept at 85℃, and steam will come out in 30 seconds after user press button, 30 mins a cycle, really energy saving especially for commercial use.

*Salt spray therapy: The generator is able to atomize salt water or medicament into tiny particulates, and mix in the air for breathing and absorbed by the skin.

*Auto aroma pump: It has temperature switch on the steam pipe, when the temperature higher than 85℃, aroma oil will be pumped into steam pipe automatically then steam will bring fragrance to everywhere of the steam room, two bottles for two smells, and perfect to use in the spa, club center.

*Service hole: There’s an after -service hole on the top of the steam generator, also can be used as another steam outlet.

*Over-heat protection: When the room temperature reaches 2°C higher than your setting, then all heating elements stop working, steam generator under heat preservation state, if water tank temperature over 115 °C, steam generator go into protection state,  steam generator stop heating. When the temperature lower than 100°C, the steam generator starts to work again

*Low water level protection: When water under some certain level and the machine failed to re-fill in water automatically, the steam generator will go into a “sleep model” until water is be re-filled or steam generator turn-off.

*Sectional heating technology: Each generator has 3 groups of heating elements which provide sectional heating, from the first beginning, all 3 groups operates at maximum power and rapid heating, when the room temp is almost reached, then group 1 stop, when the required temps is achieved, then group 2 stop.The group 3 alternates on and off to maintain the room temp.